GPR Concrete Scanning in Sharjah
In Sharjah the slab you need to core is often older than any drawing anyone still holds. We scan it with our concrete scanner, mark the bars, tendons and conduits on the concrete, and show your crew where it is clear to cut. Sharjah is a short drive from our Deira office, so most jobs are attended the same day or the next morning.
- DED Dubai licence 844806
- Same-day response in Dubai
- All 7 emirates
Get a price for this job
Send the site location, the element or ground, the area and your date. We call you back with a fixed price. Attendance in Sharjah: same day or next morning, subject to site access.
GPR Concrete Scanning in Sharjah
Buildings older than their drawings
Much of Sharjah's industrial stock has had several occupiers, each adding conduits, drainage and power runs without updating anything. When we scan a slab in the Industrial Areas or Al Qasimia we regularly find services that are on no drawing the client holds. On that kind of building the scan is the only accurate record of the slab, and the report becomes your as-built for the area we covered.
Machine bases, wash bays and anchor patterns
A lot of Sharjah coring is for fixing machinery down or draining a workshop: anchor bolt patterns, plinth fixings, drainage through ground slabs. These are clustered positions in a small area, so we grid scan the whole zone once and mark every clear position, rather than scanning hole by hole. If a planned anchor lands on a bar or a conduit, we mark the conflict so the pattern can shift before drilling.
Residential and mixed-use towers
The newer residential towers in areas such as Al Majaz and Al Nahda are often post-tensioned; older blocks are usually conventionally reinforced. You cannot tell which from the floor finish, and the drawings are not always to hand. We establish the construction on site with the scan before marking anything, and treat every slab as post-tensioned until the scan shows otherwise.
Where in Sharjah, and how fast
We cover Industrial Areas 1 to 18, Al Sajaa, Muwaileh, University City, Al Nahda, Al Majaz, Al Qasimia and Al Layyah. Attendance is normally the same day or the next morning, subject to site access. For contractors with work across several plots, we scan them in one visit.
Areas we cover in Sharjah
- Industrial Areas 1–18
- Al Nahda
- Al Majaz
- Al Qasimia
- Muwaileh
- University City
- Al Sajaa
- Al Layyah
Utility owners and permitting bodies we work alongside here: Sharjah Municipality, SEWA, Etisalat.
Concrete you will meet in Sharjah
Ground-bearing warehouse and workshop slabs in the Industrial Areas and Al Sajaa, often patched and extended over the years, which X-ray cannot reach and GPR scans from the top face. Machine bases and plinths with dense reinforcement cages. Residential towers, some post-tensioned and some not. In all of them the risk is the same: a service or a bar that no drawing shows, sitting where the hole is planned.
What you get in Sharjah
What you receive
- Rebar, tendons and conduits marked on the concrete surface on the day
- Safe drilling or coring positions marked before you start
- PDF report within 24 hours: marked-up layout, depth of each object, safe zones
- 3D scan data on request, for consultants who want to review it
Check us before you book
- Trade licence
- 844806, DED Dubai
- Registered office
- Office A-51, Al Shaikh Building 05, Al Khabeesi, Deira, Dubai, United Arab Emirates
- Operating since
- 2019
GPR Concrete Scanning in Sharjah: common questions
The building is old and we have no drawings. Can you still scan it?
Yes, and that is where scanning is worth the most. GPR does not depend on drawings: it shows what is physically in the slab now, including additions no drawing records. For older Sharjah buildings the report often becomes the only accurate record of the slab.
We need twenty holes in one workshop floor. Do you scan each one?
We grid scan the whole zone once and mark every clear position. It is quicker and cheaper than treating each hole separately, and you get one report covering all the positions.
How quickly can you get to Sharjah?
Normally the same day or the next morning, subject to site access. We reply to WhatsApp quote requests within 1 hour during working hours, Sunday to Thursday 8 AM to 6 PM and Saturday 9 AM to 3 PM.
Related guides
- Concrete scanning, 8 min readGPR scanning before core drilling in Dubai: what to prepare and what you get
The scan takes less time than most crews expect, and most of the delay on the day comes from things nobody prepared. What to have ready, what happens, and what you get back.
- Concrete scanning, 8 min readHow accurate is GPR concrete scanning? The real limits
Position, depth and certainty are three different questions, and GPR answers them with different confidence. An honest account of what a concrete scan can and cannot tell you.
- Working with us, 7 min readWhat is in a GPR survey report, and how to read one
The marks on site get the job done today. The report is what your consultant, your permit and your file keep. What it should contain, and what to question.
Related pages
GPR Concrete Scanning elsewhere in the UAE
Other services in Sharjah
Need GPR concrete scanning in Sharjah?
Send the site and what you need done. We reply within 1 hour during working hours with a price and a date. Attendance in Sharjah: same day or next morning, subject to site access.
