Diamond Core Cutting in Sharjah
Sharjah coring is industrial work — machinery bases in the Industrial Areas, drainage for wash bays and workshops, service penetrations through warehouse slabs. The buildings are often old, the drawings are often missing, and the slabs frequently contain service runs added by previous occupiers. We scan first, then cut from 12 mm to 500 mm.
- DED Dubai licence 844806
- Same-day response in Dubai
- All 7 emirates
Get a price for this job
Send the site location, the element or ground, the area and your date. We call you back with a fixed price. Attendance in Sharjah: same day or next morning, subject to site access.
Diamond Core Cutting in Sharjah
Clustered penetrations, one grid scan
Fixing machinery down usually means a pattern of anchor holes rather than a single core, and drainage for a workshop means several penetrations in a confined area. We grid scan the zone once, mark every viable position, then cut them in sequence — faster and cheaper than treating each hole as a separate job.
Undocumented services in older industrial stock
Warehouses in Industrial Areas 1 to 18 have typically served several occupiers, each adding power, drainage and compressed air without recording it. Cutting a slab like this on the assumption that the drawings are complete is how a workshop loses its power supply for a week. The scan is what makes the cut predictable.
Coverage and response
We cover Industrial Areas 1 to 18, Al Sajaa, Muwaileh, Al Nahda, Al Majaz, Al Qasimia and University City. Sharjah is close to our Dubai operations, so same-day and next-day attendance is routine.
Areas we cover in Sharjah
- Industrial Areas 1–18
- Al Nahda
- Al Majaz
- Al Qasimia
- Muwaileh
- University City
- Al Sajaa
- Al Layyah
Utility owners and permitting bodies we work alongside here: Sharjah Municipality, SEWA, Etisalat.
Slabs we core in Sharjah
Ground-bearing workshop and warehouse floors in the Industrial Areas and Al Sajaa, patched and extended over the years, often with services laid by previous occupiers. Machine bases and plinths with dense cages. Residential towers, some post-tensioned. Clustered anchor and drainage holes are scanned as one zone and cored in sequence.
What you get in Sharjah
What you receive
- Rebar, tendons and conduits marked on the concrete surface on the day
- Safe drilling or coring positions marked before you start
- PDF report within 24 hours: marked-up layout, depth of each object, safe zones
- 3D scan data on request, for consultants who want to review it
Check us before you book
- Trade licence
- 844806, DED Dubai
- Registered office
- Office A-51, Al Shaikh Building 05, Al Khabeesi, Deira, Dubai, United Arab Emirates
- Operating since
- 2019
Diamond Core Cutting in Sharjah: common questions
Can you core a warehouse floor for machinery anchor bolts?
Yes, this is a large part of our Sharjah work. Anchor patterns are normally a cluster of small-diameter holes, which we grid scan as a single zone and then cut in sequence. If the scan shows reinforcement or a service running through a planned position, we flag it before cutting so the fixing pattern can be shifted rather than the slab damaged.
What if you find a service exactly where we need the hole?
We stop and tell you before cutting. In most cases the position can be shifted by a small amount to clear the obstruction, and we mark the nearest safe alternative on the slab. Where the position genuinely cannot move, that becomes a design conversation with your engineer rather than something we cut through and report afterwards.
Do you handle the water and slurry from coring?
Yes. Wet coring produces slurry, and in an operating warehouse or workshop that matters. We contain and extract the water so the surrounding floor stays usable and hand the area back clean.
Related guides
- Concrete scanning, 8 min readGPR scanning before core drilling in Dubai: what to prepare and what you get
The scan takes less time than most crews expect, and most of the delay on the day comes from things nobody prepared. What to have ready, what happens, and what you get back.
- Concrete scanning, 6 min readWhat happens if you cut a post-tension cable
A cut tendon releases stored energy instantly and permanently weakens the slab. Here is what actually happens, and why it is not something you patch and move on from.
Related pages
Diamond Core Cutting elsewhere in the UAE
Other services in Sharjah
Need diamond core cutting in Sharjah?
Send the site and what you need done. We reply within 1 hour during working hours with a price and a date. Attendance in Sharjah: same day or next morning, subject to site access.
