Diamond Core Cutting in Dubai

We core from 12 mm to 500 mm across Dubai, and we scan before every one of them. That order matters more here than almost anywhere, because Dubai slabs are post-tensioned by default and a cut tendon is not a patch-and-continue problem — it is a structural incident with a stop-work notice attached. Scanning and cutting are both ours, so nobody is waiting on a third party between the two.

  • DED Dubai licence 844806
  • Same-day response in Dubai
  • All 7 emirates

Get a price for this job

Send the site location, the element or ground, the area and your date. We call you back with a fixed price. Attendance in Dubai: same day or next morning, subject to site access.

Opens WhatsApp with your details filled in — just press Send. We reply within 1 hour (Sun–Thu 8–6, Sat 9–3, Fri closed).

We'll use these details only to reply to your enquiry.

Diamond Core Cutting in Dubai

Fit-out programmes that cannot absorb a strike

Most Dubai coring sits inside fit-out programmes with fixed handover dates — MEP penetrations for a tower floor, drainage for a restaurant unit, riser openings for a hotel refurbishment. A strike does not just cost the repair; it costs the sequence behind it. Scanning first is cheap insurance against a delay that lands on the whole programme.

Occupied buildings and out-of-hours work

Coring in trading malls, live hotels and occupied offices generally has to happen at night or during shutdown windows, with water management and noise control that keep the rest of the building usable. We plan the cut so slurry is contained and the area is handed back clean, because in an occupied building the mess is as much of a problem as the hole.

Coverage and response

We cover the whole of Dubai, from Downtown and Business Bay through Al Quoz, DIP and Jebel Ali out to Dubai South. Same-day or next-morning attendance is normal, and for multi-site contractors we sequence several sites into one mobilisation.

Areas we cover in Dubai

  • Downtown Dubai
  • Business Bay
  • Dubai Marina & JLT
  • Deira & Bur Dubai
  • Al Quoz
  • Dubai Investments Park
  • Jebel Ali
  • Dubai Silicon Oasis
  • Al Barsha
  • Dubai South

Utility owners and permitting bodies we work alongside here: Dubai Municipality, DEWA, RTA, du and Etisalat.

Slabs we core in Dubai

Post-tensioned tower floors and podium decks, where the scan before the core is not optional. Thick transfer slabs and rafts, where long cores take time and the reinforcement is dense. Ground-bearing warehouse slabs in Al Quoz, DIP and Jebel Ali for drainage and machinery. Walls and columns for MEP openings, where hitting a main bar is a structural question for your engineer, not ours to decide on site.

What you get in Dubai

What you receive

  • Rebar, tendons and conduits marked on the concrete surface on the day
  • Safe drilling or coring positions marked before you start
  • PDF report within 24 hours: marked-up layout, depth of each object, safe zones
  • 3D scan data on request, for consultants who want to review it

Check us before you book

Trade licence
844806, DED Dubai
Registered office
Office A-51, Al Shaikh Building 05, Al Khabeesi, Deira, Dubai, United Arab Emirates
Operating since
2019

Sites we have worked on in Dubai include The Dubai Mall, Circle Mall, Nakheel Mall, Kempinski Hotel, The Edition Hotel, Emaar Properties, Dubai Properties, Zahiya City Center. See the project list

Diamond Core Cutting in Dubai: common questions

What core diameters can you cut?

12 mm to 500 mm. The most common sizes on Dubai fit-out work are 50 mm, 75 mm, 100 mm, 150 mm and 200 mm for MEP penetrations and structural testing. Larger diameters up to 500 mm are typically riser openings and drainage penetrations.

Is GPR scanning included in the core cutting price?

Scanning is part of how we work rather than an optional extra — we do not cut blind. On a quotation the scanning element is shown so you can see what it costs, but we will not proceed with coring on an unscanned slab regardless.

Can you core at night in an occupied building?

Yes. Most of our coring in Dubai malls, hotels and occupied offices happens outside trading or business hours. We manage slurry and water containment so the area can be handed back clean and in use the following morning.

Need diamond core cutting in Dubai?

Send the site and what you need done. We reply within 1 hour during working hours with a price and a date. Attendance in Dubai: same day or next morning, subject to site access.